3. Tap Block Device.
4. Tap Continue Block.
In the Zing Manager (http://sprinthotspot)
1. Log in to the home page. (See Logging In as an Administrator.)
The Devices Connected section of the home page shows a list of the devices
connected to your Main and Guest Wi-Fi networks.
2. If you want to block a listed device, click the device name. The device’s IP address
and MAC address display.
3. Click Block Device.
4. Click Block Device again.
View and Unblock Devices (Block List)
You can view a list of devices that you have blocked (see Displaying and Blocking Currently
Connected Devices (Block List)) from connecting to your NETGEAR Zing Mobile Hotspot on
your device’s Wi-Fi Block List screen, and on the Zing Manager’s Wi-Fi MAC Filter page.
If you want to allow any of these devices to connect to the network again, you can remove them
from your device’s block list.
On the Touchscreen
1. Tap > Devices.
2. Go to the last page of the Devices screen and tap Block List.
3. Tap View blocked devices. A list of the devices blocked from using your Wi-Fi
networks appears.
4. Tap the name of the device you want to unblock.
5. Tap Unblock.
In the Zing Manager (http://sprinthotspot)
1. Log in to the home page. (See Logging In as an Administrator.)
2. Click Wi-Fi > MAC Filter. A list of the devices blocked from using your Wi-Fi
networks appears.
3. Click the beside the device you want to unblock. The device is removed from
the list immediately.
Configuring the Wi-Fi Network 120
To Next Page
Loading...
Need help?
General
