NETGEAR Zing Mobile Hotspot

LED
The LED status indicator shows the hotspot’s connection status.
● Blue single blink – Device is connected to network and Wi-Fi is ready.
● Blue double blink – Data is being transferred.
● Amber blink – Network is not ready. (Mobile broadband is disconnected, no signal is
available, or Wi-Fi is asleep.)
● Alternating orange and amber blink – Software updates being applied.
Device Tutorial
The NETGEAR Zing Mobile Hotspot includes a device tutorial that shows the key features of the
LCD home screen.
To view the tutorial:
1. Launch the tutorial in one of the following ways:
• Tap > Settings > More > Support > View Tutorial.
• If viewing for the first time, on the home screen tap the Tutorial tab.
2. Shaded areas appear around each of the home screen’s elements. Tap a shaded
area to read a description of it.
3. Tap to close the description and continue to view other screen elements.
4. When finished, tap Close Tutorial.
Device Basics 16