2. If the LCD is blank, press and hold the Power button until the screen lights up.
Turning Your Device Off
1. Press and hold the Power button until the Shut Down button appears.
2. Press the Shut Down button.
Controlling Your Device Using the Power Button
The power button supports two types of presses.
Removes device from standby (low power) mode.
Wakes up (turns on) the LCD if the LCD was dormant. (The LCD turns
dark, after a configurable time of inactivity.)
and hold for two
seconds)
Turns your device off.
Press the Shut Down button that appears on the screen to confirm
that your device should be turned off.
Restarting Your Device
If you need to restart your device for some reason, you can use these methods.
● Press and hold the Power button for two seconds.
● If the touchscreen is not responding, press and hold the Power button for five seconds.
● Remove and replace the battery.
Device Basics 15
To Next Page
Loading...
Need help?
General
