What Do I Do if I Forget the Administrator
Password?
Here’s what to do if you forgot the Administrator Password.
1. Reset the software to default settings. You will need to call Sprint Customer Support
for assistance. (See Resetting to Factory Default Settings.)
If the Connection is “Always On,” Am I Always Being
Billed?
No. The connection to the network goes dormant after a period of inactivity, but the connection
can be re-established faster than having to reconnect. Billing occurs only when data is passed
across the network.
Questions About GPS
Find answers to common questions about GPS.
What is GPS?
GPS stands for Global Positioning System, which is a system that uses a series of 24
geosynchronous satellites to provide location data.
GPS satellites transmit signals to equipment on the ground. GPS receivers passively receive
satellite signals, but do not transmit.
Where Can I Use GPS?
GPS works wherever you have line-of-sight access to the GPS satellites.
How Do I Enable or Disable GPS?
By default, GPS is disabled. To enable GPS, see Enabling / Disabling GPS.
What are some GPS Limitations?
Weather conditions or tall nearby buildings may affect your ability to get a clear view of the
satellites and thus to acquire a GPS fix.
How Can I Stream GPS Data to Use With a Third-party GPS
Application?
GPS NMEA data is streamed over Wi-Fi or over a tethered USB connection using a virtual COM
port.
Follow these steps to stream NMEA data for a third-party GPS application.
1. Set GPS Mode to Continuous. (See Setting the GPS Mode.)
Frequently Asked Questions 127
To Next Page
Loading...
Need help?
General
