BTS User Manual
Neware Technology Ltd.
http://www.newarebattery.com
The tester has a built-in communication module that supports SMBUS, I2C, and HDQ protocols. Which is capacle of
real-time data sampling with the battery pack with frequency of 100KBPS. Its data transportation speed is 8-times faster
that of traditional products, and it can obtain the real-time status of each cell and make step parameter adjustments more
quickly and accurately.
SMBUS series versions and models are shown in Form 6:
Form 6 SMBUS version model, and features
The pull-up resistor and the pull-up port voltage are stable
The pull-up resistor and the pull-up port voltage have four gears each, which can
be configured on the client.
The following figure shows the front view of different versions of SMBUS boards
Figure 2-5 SMB-MOULE-1.1 module Figure 2-6 SMB-MOULE-1.3 module
2.4. AUX5
AUX5 series of auxiliary machine are connected with the mid-machine, accept the control of the mid-machine. With the
lower-machine, they also perform real-time sampling of battery voltage and temperature.
Figure 2-7AUX5 Front view
For connection of voltage test cable
For connection of temperature test cable
2.5. CALI5
The automatic calibration tool CALI5 is connected to the server, the mid-machine, and the multi-meter to operate the
calibration of the channel to eliminate the inherent error of the device, i.e., eliminate the system deviation of the control
value and the sampling value of the system deviation. Before the battery test equipment is manufactured or after a
calibration cycle, it is necessary to use the calibration tool CALI5 for channel calibration.
Figure 2-8 CALI5 Front panel
Auto-calibration machine CALI5 back panel Figure 2-9:
Figure 2-9 CALI5 back panel
To Next Page
Loading...