30
Bn
Beeper on/off
Function: This command is used to turn the audio output on/off. The
audio output frequency is proportional to the intensity of the
input power signal.
Syntax: Bn
Parameter: n = 0 beeper is off
n = 1 beeper is on
Type: integer
Related
Commands: B?- Beeper query
B?
Beeper query
Function: This query informs the user whether the 1830-C’s beeper
is on or off.
Syntax: B? or b?
Parameter: none
Returns: 0 beeper is off.
1 beeper is on.
Related
Commands: Bn - Turn the beeper on/off.
C
Clear Status Byte Register
Function: This command is used to clear the status byte register. All
bits, except the MAV bit, are set low by sending this com-
mand. The status byte register contents are described in Q?
and Appendix A.
Syntax: C or c
Parameter: None
Related
Commands: Q? - Status Byte Register query
To Next Page
Loading...
Need help?
General
