Newport 1830-C User Manual

33
Gn
Go on/off
Function: This command is used to enable/disable the 1830-C from
taking new readings. During disable mode, no 1830-C param-
eters can be changed.
NOTE:
- “Run” and “Go “ words are used interchangeably and they
represent the same 1830-C function.
- “Stop” and “Hold” words are used interchangeably
and they represent the same 1830-C function.
Syntax: Gn or gn
Parameter: n = 0 1830-C is in Hold mode, i.e. does not take new readings
n = 1 1830-C is in Go mode, i.e. takes new readings
Type: integer
Related
Commands: G? - Go query
G?
Go query
Function: This query informs the user whether the 1830-C is in the Run
or Hold mode. If the meter is in the “Run” mode, the 1830-C
will continue acquiring new measurements. In the “Hold”
mode, it stops acquiring new measurements.
NOTE:
- “Run” and “Go “ words are used interchangeably and they
represent the same 1830-C function.
- “Stop” and “Hold” words are used interchangeably
and they represent the same 1830-C function.
Syntax: G? or g?
Parameter: none
Returns: 0 1830-C is in Hold mode.
1 1830-C is in Run mode.
Related
Commands: Gn - Set 1830-C to either Run/Hold mode.

Newport 1830-C Specifications

General

Brand	Newport
Model	1830-C
Category	Measuring Instruments
Language	English