47
Section 8
Factory Service
8.1 Introduction
This section contains information regarding obtaining factory service for
the 1830-C Optical Power Meter. The user should not attempt any mainte-
nance or service of this instrument and/or accessories beyond the proce-
dures given in Section 7: Troubleshooting and Maintenance. Any problems
which cannot be resolved using the guidelines listed in Section 7 should be
referred to Newport Corporation factory service personnel. Contact
Newport Corporation or your Newport representative for assistance. The
1830-C contains no user serviceable parts. Its calibration accuracy is
warranted for a period of 1 year.
8.2 Obtaining Service
To obtain information concerning factory service, contact Newport Corpo-
ration or your Newport representative. Please have the following informa-
tion available:
1. Instrument model number (On front panel)
2. Instrument serial number (On rear panel)
3. Description of the problem.
If the instrument is to be returned to Newport Corporation, you will be
given a Return Number, which you should reference in your shipping
documents. Please fill out a copy of the service form, located on the
following page, and have the information ready when contacting Newport
Corporation. Return the completed service form with the instrument.
To Next Page
Loading...
Need help?
General
