- Communication Options: Wireless or Wired?
USB-Link™ Installation and Setup Manual 7
Wired Connection
Using a USB connection to the PC is highly recommended when diagnosing
heavily-loaded CAN/J1939 buses. By nature, Bluetooth has less bandwidth than
USB, which can result in dropped messages in situations requiring high band-
width. ECU reprogramming typically requires both high throughput and critical
timing, and should always use a USB-to-PC wired connection.
Wired communication between the USB-Link™ and your PC requires a USB
cable.
Figure 1.4 15 ft. USB Cable included with your USB-Link™
To Next Page
Loading...
