- Configuration Issues
USB-Link™ Installation and Setup Manual 75
Configuration Issues
The following table provides some possible causes and solutions to issues that
may be experienced when configuring the USB-Link™ and/or PC for wireless
communication.
Problem Possible
Cause
Solution
PC applications
produce communi-
cation errors when
trying to connect to
the USB-Link™.
Not set up for
USB-Link™.
Under the application that
is in use, check user
options to verify that the
USB-Link™ has been
selected.
Unable to find the
USB-Link™ in the
application menu.
USB-Link™
drivers not
installed or
supported.
Reinstall device drivers,
restart the PC, and check
again for the device.
The PC does not
recognize the USB-
Link™ after restart-
ing the PC.
Unplug the USB-Link™
and restart the PC. Plug
the USB cable back into
the PC.
Power LED flashes USB-Link™ is
only powered
up by USB
cable.
Check vehicle power to
make sure that there is
power on the connector
and power is on.
To Next Page
Loading...
