12 USB-Link™ Installation and Setup Manual
Chapter 2 • Installation and Bluetooth Configuration
Step 1: Install the USB-Link™ Drivers and Utilities
Instructions for Windows
®
2000 and XP Users
i If you are running Vista
®
, please refer to the special instructions for Vista
users on page 22 of this manual.
Prior to using the USB-Link™ it is necessary to install the required NEXIQ
device drivers and utilities on your PC or laptop. These device drivers are
compatible with Microsoft
®
Windows
®
2000 and XP.
IMPORTANT:
ä Remember, if you are running Windows XP on your PC, you must have
Administrator security rights and be logged in as “Admin” to successfully
complete the installation process outlined in this manual.
i If you have questions about using this product, contact NEXIQ Technical
Support at (800) 639-6774, or send us an e-mail at support@nexiq.com.
To install the device drivers and utilities:
1 Close all programs and insert the NEXIQ USB-Link Drivers CD into your PC’s
CD-ROM drive.
To Next Page
Loading...
