22 USB-Link™ Installation and Setup Manual
Chapter 2 • Installation and Bluetooth Configuration
A message appears prompting you to restart the PC.
15 Click OK to restart the PC.
16 Once the PC restarts, remove the installation CD from the CD-ROM drive.
Move on to “Step 2: Choose Your Connection,” later in this chapter.
Instructions for Vista
®
Users
Prior to using the USB-Link™ it is necessary to install the required NEXIQ device
drivers and utilities on your PC or laptop. These device drivers are compatible with
Microsoft
®
Windows
®
2000, XP, and Vista
®
.
IMPORTANT:
ä You must have Administrator security rights and be logged in as “Admin”
to successfully complete the installation process outlined in this manual.
NOTE:
i If you have questions about using this product, contact NEXIQ Technical
Support at (800) 639-6774, or send us an e-mail at support@nexiq.com.
To install the device drivers and utilities:
1 Close all programs and insert the NEXIQ USB-Link Drivers CD into your
laptop’s CD-ROM drive.
Figure 2.13 Restart Prompt
To Next Page
Loading...
