- Step 1: Install the USB-Link™ Drivers and Utilities
USB-Link™ Installation and Setup Manual 23
The AutoPlay window opens.
2 Click Install or run program (i.e., “Run setup.exe Published by IDSC
Holdings LLC”).
3 Click Continue.
The installation begins by displaying the Welcome! screen.
—If the program does not automatically start, access your CD-ROM drive
through Start
4
Computer and double-click the SETUP.EXE file.
4 Read the information displayed on the Welcome! screen, and click Next.
Figure 2.14 Installation Welcome! Screen
To Next Page
Loading...
