E47
Shooting Menu (A, B, C or D Mode)
Reference Section
Exposure Bracketing
The exposure (brightness) can be changed automatically during continuous
shooting. This is effective for shooting when it is difficult to adjust the picture
brightness.
When exposure bracketing is enabled, the current setting is displayed during
shooting (A6). When Off is selected, an icon for the current setting is not
displayed.
B Notes on Exposure Bracketing
• Exposure bracketing is not available in D (Manual) mode.
• When exposure compensation (A68) and ±0.3, ±0.7 or ±1.0 in Exposure bracketing are set
simultaneously, the combined exposure compensation values are applied.
• This feature cannot be used simultaneously with certain features. See “Features That Cannot Be
Used Simultaneously” (A75) for more information.
Rotate the mode dial to A, B or C M d button M A, B or C tab (A11)
M Exposure bracketing
Option Description
±0.3
Camera varies exposure by 0, –0.3, and +0.3 over next three shots. The
three shots are taken in sequence when the shutter-release button is
pressed all the way.
±0.7
Camera varies exposure by 0, –0.7, and +0.7 over next three shots. The
three shots are taken in sequence when the shutter-release button is
pressed all the way.
±1.0
Camera varies exposure by 0, –1.0, and +1.0 over next three shots. The
three shots are taken in sequence when the shutter-release button is
pressed all the way.
Off (default
setting)
Exposure bracketing is not performed.
To Next Page
Loading...
