58
i (User Setting Modes)
Shooting Features
Saving Settings in i Mode
1 Rotate the mode dial to the desired exposure
mode.
• Rotate to A, B, C or D.
• Settings can be saved even if rotated to i (the default
settings of shooting mode A are saved when the
camera is first purchased).
2 Change to a frequently used combination of shooting settings.
• See “i (User Setting Modes)” (A57) for more information about the saved settings.
3 Press the d button.
• The shooting menu is displayed.
4 Use the multi selector to select Save user
settings, and press the k button.
•Done screen is displayed, and the current settings are
saved.
B Note on Clock Battery
If the internal clock battery (A23) is exhausted, the settings saved in i will be reset. Writing down
any important setting is recommended.
C Resetting for User settings
If Reset user settings is selected, the settings that are saved in the user settings are reset as follows:
• Shooting mode: W (Programmed auto)
• Zoom position: maximum wide-angle position
• Flash mode:
U (Auto)
• Focus mode:
A (Autofocus)
• Exposure compensation: 0.0
• Shooting menu: Same as the default setting for each item
Save user settings
Reset user settings
Shooting menu
Startup zoom position
Zoom memory
To Next Page
Loading...
