26
11-6
After confirming that “D:\INF\LS4000\Win98SE” is displayed in the
text box under Specify a location (for “D” substitute the drive
letter of the CD-ROM drive containing the Nikon Scan 3 CD), click
Next.
11-7
The dialog shown at right will be displayed. Click
Next.
11-5
In the Browse for Folder dialog, select the Win98SE folder from
under Nkscan > INF > LS4000 and click OK.
11-8
A dialog will be displayed announcing that registration is complete.
Click Finish.
After completing device registration, check that the Windows de-
vice drivers are installed and functioning normally.
Pg. For more information on:
37 Confirming That the Device Driver Is Correctly Installed (Windows 98SE)
To Next Page
