- Ａ ･ -
VBA18001-R.3719.A
logo�Q0440�forGraphic
070518�Gdesign�ito
Shooting-image Adjustment
1. Summary
When the D3 shooting image-related and listed parts on Page A52 are replaced, be sure to make this adjustment
by the shooting image adjustment software for D3 (J65106).
Get the reference values beforehand by using the reference body, then make this adjustment.
Make all of the adjustment items in numeric order. They are programmed to perform continuously, so when one
item is completed, the software automatically moves on to the next item.
If the adjustment is interrupted by "NG", the adjustment item can be restarted halfway from the "NG" item, and
the adjustment of items which ended with "OK" have been completed.
2. Adjustment software function
(1) Gain difference adjustment among channels
(2) Stitching adjustment
(3）"Sensitivity" adjustment
(4）Shading adjustment
(5）Gr/Gb compensation adjustment (R/B lter) / Line crawl adjustment
(6) "Sensitivity ratio" adjustment
(7) "Sensitivity" / "Sensitivity ratio" adjustment
(8) Pixel defect compensation - black point
(9) Pixel defect compensation - white point
Tilted sensor inspection & adjustment
TFT adjustment
Obtain reference value
Initial settings (factory default settings)
Conrm data
Version No./ Serial No.
※ When the adjustments from (3),(6), and (7) are made, get the reference values beforehand by using the (D3)
reference body, then perform the adjustments.
3. Hardware requirements
OS： Windows2000, WindowsXP, Windows VISTA
Japanese or English OS
PC： CPU Pentium Ⅱ or more
Memory 256MB or more
USB1.1 or 2.0
Screen size: 1024×768 pixels or more
4. How to set up
Create "C:\DeskTopLauncher\D-SLR\D3IMGIMG" folder is created in the hard disc of PC, so copy "PD3IMG.
EXE". This le is an self-extracting le, so decompress it in the created folder.
※ Be sure to copy the above le in the same directory. Note that the adjustment can not be made except in the
above folder.
To Next Page
Loading...
Need help?
General
