91
Choose this mode to minimize blurring caused by camera
movement when the mirror is raised. To use mirror-up mode,
press the release mode dial lock release and rotate the release
mode dial to MUP (mirror up).
After pressing the shutter-release
button halfway to set focus and
exposure, press the shutter-release
button the rest of the way down to raise
the mirror. 4 will be displayed in the
control panel; press the shutter-release button all the way down
again to take the picture (in live view, there is no need to raise
the mirror; the picture is taken the first time the shutter-release
button is pressed all the way down). A beep will sound, unless
Off is selected for Beep options > Beep on/off in the setup
menu (0 271). The mirror lowers when shooting ends.
Mirror up Mode (MUP)
Release mode dial lock release
Release mode dial
D Mirror Up
While the mirror is raised, photos can not be framed in the viewfinder
and autofocus and metering will not be performed.
To Next Page
Loading...
