19
First Steps
Attach the Camera Strap
Attach the strap securely to the camera eyelets.
Charge the Battery
Insert the battery and plug the charger in (depending on the
country or region, the charger comes with either an AC wall
adapter or a power cable). An exhausted battery will fully charge
in about two hours and 35 minutes.
• AC wall adapter: Insert the AC wall adapter into the charger AC
inlet (q). Slide the AC wall adapter latch as shown (w) and
rotate the adapter 90 ° to fix it in place (e). Insert the battery
and plug the charger in.
AC wall adapter latch
To Next Page
Loading...
