158
A The BKT Button
If HDR (high dynamic range) is selected
for Custom Setting f1 (Custom control
assignment) > BKT button + y (0 266),
you can select the HDR mode by pressing
the BKT button and rotating the main
command dial and the strength by
pressing the BKT button and rotating the
sub-command dial. The mode and strength
are shown in the control panel: the icons
representing the mode are 5 for Off, B for
On (single photo), and 6 for On (series), while those representing
strength are & for Auto, 7 for Extra high, 8 for High, 9 for Normal,
and ! for Low.
A Interval Timer Photography
If On (series) is selected for HDR mode before interval timer shooting
begins, the camera will continue to shoot HDR photographs at the
selected interval (if On (single photo) is selected, interval timer
shooting will end after a single shot).
To Next Page
Loading...
