176
4 Take the photograph.
From a distance of 5 m (16 ft) or less,
aim the transmitter on the ML-L3 at
the infrared receiver on the camera
and press the ML-L3 shutter-release
button. In delayed remote mode, the
self-timer lamp will light for about two
seconds before the shutter is released.
In quick-response remote mode, the self-timer lamp will flash
after the shutter has been released. In remote mirror-up mode,
pressing the ML-L3 shutter-release button once raises the
mirror; the shutter will be released and the self-timer lamp
will flash after 30 s or when the button is pressed a second
time.
A Release Mode
Pictures taken with an optional ML-L3 remote control are shot in
single-frame advance mode, regardless of the option selected with the
release mode dial.
D Before Using Optional ML-L3 Remote Controls
Before using the remote control for the first time, remove the clear
plastic battery-insulator sheet.
To Next Page
Loading...
