71
4 Choose the color range.
Press 1 or 3 to increase or decrease
the range of similar hues that will be
included in the final image. Choose
from values between 1 and 7; note
that higher values may include hues
from other colors.
5 Select additional colors.
To select additional colors,
rotate the main command
dial to highlight another of
the three color boxes at the
top of the display and
repeat Steps 3 and 4 to
select another color. Repeat for a third color if desired. To
deselect the highlighted color, press O (Q). To remove all
colors, press and hold O (Q). A confirmation dialog will be
displayed; select Ye s .
6 Press J.
Press J to exit when settings are complete. During shooting,
only objects of the selected hues will be recorded in color; all
others will be recorded in black-and-white.
To Next Page
Loading...
