Chapter 10 Preparation for Using the Annotation Function and Measurement Function
104
Scale, Annotation,
and Measurement
Functions
(5) Setting the magnification of the intermediate magnification lens
If the microscope is connected to the DS-L4 without using a USB cable, you can set the magnification of the
zoom/intermediate magnification lens. The magnification set here is applied only in OPTICAL calibration mode when the
microscope is connected to the DS-L4 without using a USB cable.
1 In the [TOOL MENU: MEAS/DRAW] menu, tap the desired
measurement or drawing button to display the
corresponding submenu.
2 Tap [INT MAG].
3 Tap [SELECT], and then select the magnification of the
intermediate magnification lens being used.
4 Tap [X] to close the [TOOL SET] screen.
To edit the list of intermediate magnification lenses
(1) Tap [EDIT], and then tap the button for the lens
whose data you want to edit.
(2) Enter the magnification.
(3) Tap [SAVE].
Setting the magnification of an intermediate
magnification lens
2
3
To Next Page
Loading...
