Nikon DS-L4 - Operations that Can be Performed for Measurement Results; Erasing All Measurement Results; Exporting Measurement Results to a CSV File

Chapter 12 On-Screen Measurement
132
Scale, Annotation,
and Measurement
Functions
12.3
Operations That Can Be Performed for Measurement Results
12.3.1
Erasing All Measurement Results
You can erase all drawings, including measurement results,
from the overlay. To do this, tap the [ERASE ALL] button in the
[TOOL MENU: MEAS/DRAW] screen.
When you tap the button, a confirmation message is displayed.
If you are sure you want to erase all drawings, tap [Yes]. To
cancel the operation, tap [No].
Tapping [Yes] erases all drawings, including all measurement
results, annotations, straight lines, arrows, free-hand lines, and
markers.
Erasing all measurement results
[ERASE ALL] button of a specific measurement or drawing menu
If you tap [ERASE ALL] in a specific measurement or drawing menu, only the relevant measurement or drawing
result is erased.
12.3.2
Exporting Measurement Results to a CSV File
You can export measurement results to a CSV file (a text file
with an extension of ".csv") by tapping [SAVE CSV] in the [TOOL
MENU: MEAS/DRAW] screen. The save destination of CSV files
is the same as that of images.
For details about the items that are output to a CSV file, refer to
"10.1.2 Specifying the Basic Settings of the Annotation and
Measurement Functions".
Export to a CSV file
Automatic export of a CSV file
You can set the DS-L4 to export measurement results to a CSV file automatically when you capture an image. For
details, refer to "10.1.2 Specifying the Basic Settings of the Annotation and Measurement Functions". When
[SCREEN CAP MODE] is turned on for the still image setting, image data is not saved to a CSV file. Additionally,
a CSV file is not saved when a motion image is saved.