Nikon DS-L4 - Measuring the Length between Two Points

Chapter 12 On-Screen Measurement
125
Scale, Annotation, and Measurement
Functions
12.2.1
Measuring the Length Between Two Points
You can measure the length between two points specified on an image.
1 Display the [TOOL MENU: MEAS/DRAW] screen.
2 Tap [2 POINTS].
3 On the screen, specify two arbitrary points (A and B in
the figure), and check the length between the two
points.
To continue measurement, repeat the above steps.
4 To terminate measurement, tap [CLOSE] to redisplay the
[TOOL MENU: MEAS/DRAW] screen.
Measuring the length between two points
Adjusting measurement results
You can adjust a measurement result that you have added to an image. To do this:
(1) Tap [SELECT].
(2) Select a desired measurement result.
(3) Adjust the measurement result.
- You can move the displayed value of a measurement result by mouse dragging.
- You can move scale lines by mouse dragging.
- You can resize or rotate a scale line by mouse-dragging a line end point.
(4) To redisplay the [2 POINTS] menu, tap [X] in the [SELECT] menu.
3
1
2
4