Nikon DS-L4 - Assigning the Capture Function to the Center;Right Mouse Button

Chapter 13 Changing Settings
143
Changing
Settings
13.2.3
Assigning the Capture Function to the Center/Right Mouse Button
— [CAPTURE USING THE MOUSE] area —
You can assign the Capture function to a mouse button ([SETTINGS] > [DS SETUP] > [MAIN] > [CAPTURE USING THE
MOUSE]). To do this:
1 Display the [MAIN] screen.
2 In the [CAPTURE USING THE MOUSE] area, tap one of
the displayed option buttons.
3 Tap [SAVE].
Assigning the Capture function to a mouse button
Capture function assignment options
Option Description
OFF The Capture function is not assigned to a mouse button. (This is the initial setting.)
CENTER Captures and saves a still image when the center mouse button is clicked.
RIGHT Captures and saves a still image when the right mouse button is clicked.
Notes on assigning the Capture function to a mouse button
 Only a single image is captured even if [CONT.] is selected as the shot mode.
 No image can be captured in the following cases:
- Thumbnails are displayed.
- A motion image is being replayed.
- The [MIC SETUP] or [DS SETUP] screen is displayed.
- Consecutive capture is in progress.
3
1
2