Chapter 11 Adding Lines and Annotations to an Image
109
Scale, Annotation,
and Measurement
Functions
11.3
Changing the Settings of the Scale and Measurement Functions
You can specify the settings of the scale and measurement functions by tapping [TOOL SET] in the [TOOL MENU:
MEAS/DRAW] or [TOOL MENU: SCALE] screen.
1 Display the [TOOL MENU: MEAS/DRAW] or [TOOL
MENU: SCALE] screen.
2 Tap [TOOL SET].
The [TOOL SET] submenu appears. For details about the
settings that can be specified in each menu, refer to the
following pages.
To Next Page
Loading...
