Nikon DS-L4 - Page 148

Chapter 13 Changing Settings
140
Changing
Settings
(4) Setting the light source of the microscope
You can select [HALOGEN] or [LED] as the light source used by the microscope. To do this:
1 Display the [MAIN] screen.
2 In the [MENU SETTING] area, tap [LIGHT SOURCE].
3 Select the type of light source used by the microscope.
4 Tap [SAVE].
Setting the microscope light source
Light source options
Option Description
HALOGEN Select this when a halogen lamp is used for the light source of the microscope. (Initial setting)
LED Select this when LED illumination is used for the light source of the microscope.
Light source setting and scene mode
If [LED (BIO MIC)] is selected as the light source, [HE] and [ELISA] are not displayed as scene modes of the [BIO]
type. If you want to stain an object by the HE or ELISA method during observation using the LED light source, select
[BF] as the scene mode.
Before selecting [LED]
If [LED (BIO MIC)] is selected, the DS-L4 settings are optimized for the eco-illumination system, the high-intensity
LED used for Nikon ECLIPSE Ci-E/Ci-L, E100, E200, and other microscope models.
For details on the supported models, contact your nearest Nikon representative.
4
1
2