Chapter 4 Preparing for Use
16
Please Read
First
4
Confirm that the menu and live image are
displayed on the monitor.
Depending on the status of the optical device, you may not be
able to
determine if the image displayed on the monitor is the live image.
Especially when a camera is connected to a microscope, if the
subject is insufficiently illuminated or out of focus, the camera
gain may increase to the maximum, degrading the image quality.
Start screen
DS-L4 Screen
User types
In the DS-L4, users are managed in three levels: Supervisor, User, and Terminal User. Only Supervisors can
change the settings in the [DS SETUP] and [MIC SETUP] menus.
If no user account is registered, no one can connect to the DS-L4 and retrieve images from a viewer terminal.
Changing the password
In the login screen, enter your ID and password, and then tap
[PASSWORD CHANGE]. You can then set a new password.
If you enter an incorrect password five times
If you enter an incorrect password five times, your account will be locked to prevent login. Supervisors can unlock
user accounts in the [ACCOUNT: USER MANAGEMENT] screen of the [DS SETUP] menu.
Resetting a Supervisor password
If a Supervisor forgets his or her password, he or she can log in as a special user to reset the Supervisor's
password. For the user ID and password of a special user, contact your Nikon representative.
To Next Page
Loading...
