Chapter 8 Capturing Images with the Advanced Setting Menu
71
Photographing and
Replaying Images
[CONTRAST]
Select a tone curve for adjusting the contrast of the image from the following preset
options (initial value: STANDARD). Select a setting that is appropriate for observing
the subject.
Option Description
WIDE D
(Wide dynamic range)
Use this option when you need a gradation covering from the
darkest region to the brightest region for a subject that is
highly reflective. Recommended for: IC chips, substrates,
gears, etc.
WEAK
(Weak contrast)
Use this option to reduce the contrast. Recommended for:
cells, tissue, and other ordinary subjects.
STD
(Standard contrast)
Use this option for ordinary photographing. Recommended
for: cells, tissue, and other ordinary subjects.
STRONG
(Strong contrast)
Use this option to obtain strong contrast in the image.
Recommended for: cells, tissue, and other ordinary subjects.
LINEAR
Use this option to obtain an output that is straight (linear)
relative to the input. Use this option to study the light intensity
differences from the photographed data. Recommended for:
DIC observation, PH observation.
METAL
Use this option to obtain a high-contrast image while
suppressing the irregularity in brighter sections.
Recommended for: metal tissue, ceramic materials.
ENHANCE
Use this option to make observation with high contrast.
Recommended for: metal tissue, ceramic materials,
documentation.
[CONTRAST] menu
To Next Page
Loading...
