Chapter 8 Capturing Images with the Advanced Setting Menu
74
Photographing and
Replaying Images
(3) Initializing the photographing conditions
You can reset the photographing conditions configured in [CAMERA MENU] to the initial values with a simple operation. To
do this:
1 Display the [CAMERA MENU: IMAGE] screen.
2 Tap [CLR SET].
A message asks you whether you really want to initialize the
photographing conditions.
3 To initialize the photographing conditions, tap [Yes]. To
not initialize them, tap [No].
If you tap [Yes], the photographing conditions are reset to
the initial values.
White balance setting
Executing [CLR SET] does not reset the current white
balance setting. Set white balance again as needed.
Initializing the photographing conditions
Items that can be initialized by [CLR SET]
Screen Function Description
[CAMERA MENU:
CAMERA]
Scene mode/custom setting NEUTRAL
Exposure compensation 0
Camera gain Canceled (because exposure mode is reset to PROG)
Image mode FAST
Exposure mode PROG
Metering mode Average
Metering area size Large
Frame No change
Custom metering area
(position)
The size and position of the custom metering area are not
changed.
AE lock Off
FUNC1 to FUNC3 Assigned functions do not change.
[CAMERA MENU:
IMAGE]
RB adjustment 100, 100
Chroma 0
Hue 0
Black level 0
Contrast Standard
Sharpness 2
Color effect Color
Note: The settings specified on the [CAMERA MENU: SHOT/REC], [TOOL MENU], and [DS SETUP] screens are not
initialized by executing [CLR SET].
1
2
To Next Page
Loading...
