Safety Precautions
8
1. Precautions on power supply ratings and power cords
Before connecting the power cords to wall outlets, check your power-line ratings to make sure that
the input voltage and current capacity requirements of the products are sufficient. Using a wrong
power cord may result in malfunction, failure, or fire. Always use power cords that satisfy local
safety regulations. Always use three-pole grounded outlets.
2. Precautions on connecting cables
Always switch off the power switches to all devices before connecting or disconnecting cables.
To prevent wires from breaking, do not pull cables by the sheath; instead, firmly grasp the plug
when connecting or disconnecting a cable.
3. Emergency stop
In an emergency, turn off all power switches and unplug the power cords.
4. Do not wet the product.
Do not wet nor spill a liquid on the product to avoid malfunction, over-heating, or electric shock. If a
device is subject to contact with water, immediately switch off the power switch to that device and
wipe off the water with a dry cloth. If water enters a device, immediately suspend use of the
product, unplug the power cord from the outlet, and contact your nearest Nikon representative.
5. Do not place any object on the product.
To prevent deformation, failure, or malfunction, and to avoid injury, never place any objects (heavy
ones in particular) on any part of the system.
CAUTION
To Next Page
Loading...
Need help?
General