Chapter 2 Preparations
2.2 Overview of Setup Procedure
2-26
2.2 Overview of Setup Procedure
1
2
• Attaching the light source (TI-TIRF-PAU)
• Attaching the dichroic mirror (TI-PAU only)
• Attaching the epi-fl filter turret (TI-FLC, TI-FLC-E, or
TI-FLC-E/HQ)
• Assembling the microscope
• Attaching the field diaphragm unit
• Attaching the laser safety cover
• Mounting the filter cubes
• Attaching the camera
3
• For the four-laser module A
4
• Connection to the Shutter Unit
• Connection to the fiber light source (TI-TIRF-PAU)
• Replacing the optical path switch mirror (if necessary)
5
• Laser safety check
• Check sheet entry
Setting Up the PC and
Operation Software
(Chapter 3)
Confirmation and
Check Sheet
(Chapter 7)
Setting Up the Microscope
(Chapter 4)
Laser Unit (Chapter 5)
Connection between the Laser
Unit and the Microscope
(Chapter 6)
To Next Page
Loading...
Need help?
General