Nikon Eclipse TI-TIRF-E - C-LU3 EX Three-Laser Unit EX

Chapter 5 Laser Unit
5.3 C-LU3EX Three-laser Unit EX
1-122
5.3 C-LU3EX Three-laser Unit EX
The setup procedure for the three-laser unit EX is given below.
1. Preparation
2. Laser Installation
3. Laser Rough Adjustment 1
4. Laser Rough Adjustment 2
5. Final Adjustment for the Ar Laser Light with the Optical Fiber
6. Final Adjustment for the He-Ne Laser Light and 405 Laser Light with the Optical Fiber
7. Adjusting the AOM Controller (When the AOM Unit Used Only)
8. Attaching the Sheet Metal Cover