Nikon Eclipse TI-TIRF-E - Setup Procedure; Assembling each Part and Attaching Them to the Microscope

Chapter 4 Setting Up the Microscope
4.2 Setup Procedure
1-74
4.2 Setup Procedure
4.2.1 Assembling Each Part and Attaching Them to the Microscope
Perform the steps below to assemble each part and attach them to the microscope.
1
Attach the light source (TIRF illuminator unit, motorized TIRF illuminator unit, or photo
activation illuminator unit).
⇒ Page 1-75
2
Attach the dichroic mirrors (photo activation illuminator unit only). ⇒ Page 1-77
3
Attach the field diaphragm unit. ⇒ Page 1-78
4
Attach the epi-fl filter turret. ⇒ Page 1-79
5
Assemble the remaining microscope parts. ⇒ Page 1-79
6
Attach the laser safety cover (TIRF illuminator unit or motorized TIRF illuminator unit
only).
⇒ Page 1-80
7
Attach the light shielding plate. ⇒ Page 1-80
8
Attach the filter cubes. ⇒ Page 1-81
9
Attach the camera. ⇒ Page 1-81
10
Affix the labels. ⇒ Page 1-82