Nikon Eclipse TI-TIRF-E - Page 232

Chapter 6 Connection between the Laser Unit and the Microscope
6.1 Setting and Connecting the TI-LUSU Shutter Unit
1-218
(3) DIP Switch Locations
Detach the four screws on the bottom of the shutter unit to open the bottom plate with the circuit board.
The DIP switches are mounted on the lower left part of the circuit board viewed from the operation switch
side.
1
ONOFF
EXCLUSIVE
AUTO
TIRF PAU
S4 S6
2
3
4
NON-EX
2-LASER
DIP switches S4 and S6
Figure 6.1-4