Chapter 1 System Configurations and Part Names
1.4 Name of Each Part
1-63
Protection plate (for nosepiece)
The protection plate (for nosepiece) is a component designed for shielding the gap between the nosepiece
and the epi-fl filter turret to avoid accidental jamming of fingers inserted into the gap or the laser radiation
from the gap.
Two types of protection plate are prepared for the nosepiece being used. One for the TI-N6, TI-ND6 and
TI-ND6-E nosepieces is supplied with Ti-E and Ti-E/B, and the other for the TI-ND6-PFS nosepiece is
supplied with the nosepiece. Follow the procedure described in “4.2.3 Attaching the Laser Safety Kit” to
attach the protection plate in place.
To Next Page
Loading...
Need help?
General