03 - General Information
16
Service Manual – SC250, Scrubtec 334, MA 30
Maintenance
The lifespan of the machine and its maximum operating safety are ensured by correct and regular maintenance.
Warning! Read carefully the instructions in the Safety chapter before performing any
maintenance procedure.
The following tables provides the scheduled maintenance. The intervals shown may vary according to particular working
conditions, which are to be dened by the person in charge of the maintenance.
For instructions on maintenance procedures, see the following chapters.
Scheduled Maintenance Table
Procedure
Daily, after using the
machine
Weekly
Every six
months
Battery charging
Squeegee bar cleaning
Brush Cleaning
Cleaning of the brush compartment and the debris collection grid
Recovery tank and solution tank rinsing
Cleaning of intake duct
Cleaning of the solution dispensers
Squeegee blades check
Detergent lter cleaning
Cleaning of the air lter and gaskets
Squeegee bar replacement
To Next Page
Loading...
