To Next Page

To Previous Page

Scrub System, Cylindrical 107Service Manual – SC6500

™

3. Use a 1/2” drive extension and

ratchet in the large pulley

slot, to rotate the pulley while

pulling outward on the belt to

roll the belt off of the pulleys.

4. Place the new belt on the

large pulley and then use a

plastic wire tie to hold the belt

on the pulley.

5. Loop the belt over the small

pulley and hold it on.

6. Use a 1/2” drive extension and

ratchet in the large pulley

slot, to rotate the pulley to roll

the belt onto the pulley.

Nilfisk-Advance SC6500 45C User Manual

Questions and Answers: