47
Password: Enter the password for accessing the DDNS management interface.
After finishing setting, click Apply/Save to save and apply the settings.
DSL
Choose Advanced Setup > DSL and the following page appears. In this page, you can view the DSL settings. Usually, you
can keep this factory default setting. The modem negotiates the modulation mode with the DSLAM.
In this page, you can set the DSL settings. Usually, you do not need to modify the factory default settings.
After finishing setting, click Apply/Save to save and apply the settings.
UPNP
Choose Advanced Setup > UPnP and the following page appears.
In this page, you can enable or disable the UPnP function. After finishing setting, click Apply/Save to save and apply the
settings.
To Next Page
Loading...
