44
ROUTING
Choose Advanced Setup > Routing > Default Gateway and the following page appears.
In this page, you can modify the default gateway settings.
Select a proper WAN interface in the drop-down list of Selected WAN Interface as the system default gateway.
After finishing setting, click Apply/Save to save and apply the settings.
Choose Advanced Setup > Routing > Static Route and the following page appears.
In this page, you can add or remove a static policy rule.
Click the Add button to display the following page.
IP Version: Select the IP version.
Destination IP address/prefix length: Enter the destination IP address.
Interface: select the proper interface for the rule.
Gateway IP Address: The next-hop IP address.
Metric: The metric value of routing.
After finishing setting, click Apply/Save to save and apply the settings.
To Next Page
Loading...
