31
LAN
Choose Advanced Setup > LAN, and the following page appears.
In this page, you can configure an IP address for the DSL router, enable IGMP snooping, enable or disable the DHCP server,
edit the DHCP option, configure the DHCP advanced setup and set the binding between a MAC address and an IP address.
Configuring the Private IP Address for the DSL Router: In this page, you can modify the IP address of the device.
The preset IP address is 192.168.1.1.
Enabling IGMP Snooping: IGMP snooping enables the router to forward multicast traffic intelligently, instead of
flooding all ports in the VLAN. With IGMP snooping, the router listens to IGMP membership reports, queries and leave
messages to identify the switch ports that are members of multicast groups. Multicast traffic will only be forwarded to
ports identified as members of the specific multicast group or groups.
Enabling the LAN Side Firewall: Firewall can prevent unexpected traffic on the Internet from your host in the LAN.
In this page, you can enable or disable the LAN side firewall.
Configuring the DHCP Server: If you enable the DHCP server, the clients will automatically acquire the IP address
from the DHCP server. If the DHCP server is disabled, you need to manually set the start IP address, end IP address and
the lease time for the clients in the LAN.
Editing the DHCP Option60: Click the Edit DHCP Option60 button in the Local Area Network (LAN) Setup page
to display the DHCP Option60 Setup page.
Editing the DHCP Option: Click the Edit DHCP Option button in the Local Area Network (LAN) Setup page to
display the DHCP Option Setup page.
DHCP Advanced Setup: Click the DHCP Advance Setup button in the Local Area Network (LAN) Setup page to
display the following page. In this page, you can enable or disable DHCP for every LAN interface.
To Next Page
Loading...
Need help?
General