58
BASIC
Choose Wireless > Basic to display the following page. In this page, the figure in the right area is 2-dimensional code. It
includes the wireless SSID and password. You can obtain the wireless SSID and password through scanning this figure.
This page allows you to configure the basic features of the wireless LAN interface.
Enable Wireless: Enable or disable the wireless function.
Hide Access Point: if you want to hide any access point for your router, select this option, and then a station cannot
obtain the SSID through the passive scanning.
Clients Isolation: When many clients connect to the same access point, they can access each other. If you want to
disable the access between the clients that connect to the same access point, you can select this option.
Disable WMM Advertise: After enabling this option, the transmission performance multimedia of the voice and video
data can be improved.
Enable Wireless Multicast Forwarding (WMF): After enabling this option, the transmission quality of video service
such as IPTV can be improved.
SSID: For security reason, you should change the default SSID to a unique name.
BSSID: Display the MAC address of the wireless interface.
Country: The name of the country with which your gateway is configured. This parameter further specifies your
wireless connection. For example, channel will adjust according to nations to adapt to each nation's frequency provision.
To Next Page
Loading...
Need help?
General