Need help?Do you have a question about the Nilox DAS-1410 and is the answer not in the manual?
General| Connectivity Technology | Wireless |
|---|---|
| Frequency Band | 2.4 GHz |
| Wireless Protocol | 802.11b/g/n |
| Encryption Algorithm | WEP, WPA, WPA2 |
| Compliant Standards | IEEE 802.11b, IEEE 802.11g, IEEE 802.11n |
| Type | Wireless router |
| Data Link Protocol | IEEE 802.11b, IEEE 802.11g, IEEE 802.11n |
| Features | Firewall |
Configure DSL ATM interfaces, including VPI, VCI, and DSL link types.
Confirming saved ATM interface configurations.
Configure WAN services like PPPoE, PPPoA, and IPoA.
Step-by-step guide for configuring a PPPoE WAN connection.
Configure PPP username, password, and authentication for PPPoE.
Set default gateway and DNS servers for the PPPoE connection.
Step-by-step guide for configuring a PPPoA WAN connection.
Configure PPP username, password, and authentication for PPPoA.
Set default gateway and DNS servers for the PPPoA connection.
Step-by-step guide for configuring an IPoA WAN connection.
Configure WAN IP settings and NAT for the IPoA connection.
Set default gateway and DNS servers for the IPoA connection.
Configure the router for 3G internet connection via USB modem.
Details on APN, dial numbers, and connection priority for 3G.
Configure router's IP address, subnet mask, and DHCP server settings.
Set up virtual servers to forward incoming traffic to specific internal hosts.
Add or remove virtual server entries for port forwarding.
Configure firewall rules to block or permit traffic.
Filter wireless clients based on MAC addresses.
Add or remove MAC filter rules and manage filtering policies.
Configure QoS to prioritize network traffic for better performance.
Manage QoS queues and rules for traffic prioritization.
Define traffic classification rules for QoS.
Configure wireless network authentication and encryption.
To Next Page
