Nilox DAS-1410 - WPA2-PSK Wireless Security

64
 WPA2
 Select SSID: Select a SSID for configuring the security settings.
 Network Authentication: Select the WPA2 mode.
 WPA2 Preauthentication: Enable or disable pre-authentication.
 Network Re-auth Interval: Set the network re-auth interval.
 WPA Group Rekey Interval: Setting the interval for renewing key.
 RADIUS Server IP Address: Enter the IP address of the RADIUS server. RADIUS server is used to authenticate the
hosts on the wireless network.
 RADIUS Port: The port number that the RADIUS server uses. The default port number is 1812. You may change it
according to the server setting.
 RADIUS Key: Set the RADIUS key for accessing the RADIUS server.
 WPA/WAPI Encryption: You may select AES, or TKIP+AES.
 WPA2-PSK
 Select SSID: Select a SSID for configuring the security settings.
 Network Authentication: Select the WPA2-PSK mode.
 WPA/WAPI passphrase: The key for WPA encryption. Click here the button to display the current key. The default
key is 87654321.
 WPA Group Rekey Interval: Setting the interval for renewing key.
 WPA/WAPI Encryption: You may select AES, or TKIP+AES.