Revision 2
• Routinely check high pressure water lines and fittings for leaks. High pressure water
leakage is wasted energy.
• Inspect all around the area for parts, tools and rags before operating the unit.
• Make sure all
of
the operating parts
of
the unit are clean.
• Maintain records
of
the repair performed on the unit. These records will provide
valuable information for ordering specific parts and for maintenance in general.
• Handle critical parts with care. Avoid scratching or denting the high pressure water
system components.
© Copyright December, 1999 NLB Corporation
8-6
To Next Page
Loading...