Revision O
II.
Ordering Parts
Section 9: PARTS identifies the high pressure water jetting components and their
accompanying part numbers. The section is typically arranged with major assemblies first,
followed by subassernblies. Whenever possible, the parts list for complicated assemblies
includes exploded view illustrations. These illustrations can be helpful in understanding how
to operate and disassemble each assembly. Recommended spare parts are shown highlighted
on the parts list.
A.
Ordering Procedure
You must have the following information available when ordering parts:
1.
Part name
2.
Part number
3. Quantity ordered
4. Date required
5.
Shipping information
6.
Purchase order number
If
the ordered part is in stock, it will be shipped within three (3) working days from the time
the order is placed.
If
the part is not in stock, the customer will be given an estimated
shipping date when the order is placed.
Sarne-day shipments can
be
made in the event
of
an
equipment breakdown only
if
the requested part is in stock and the order is received before
3:00
pm
EST.
© Copyright September, 1999 NLB Corporation
10-3
To Next Page
Loading...