Revision 7
I.
General Description
The NLB Corporation Models 1312D, 1012D, 812D, 612D, 512D, 412D, 3.512D, & 312D
high pressure water jetting units are designed for minimal maintenance and dependable
performance
at
full scale industrial use.
The high pressure water jetting units consist
of
a 1012 Triplex high pressure pump, suction
surge tank, driver motor, and various accessories which are all mounted on a trailer or skid
for mobility. The standard models all incorporate a V-belt drive. Optional water lubrication
and direct drive gear-pac are also available.
The trailer mounting unit contains the following features:
• Rugged Steel Trailer
• Heavy-Duty Dual Axle Design
• Heavy-Duty Fenders
• 16.5" (4.2 cm) Wheels
• Lights and Electric Brakes
II. Water Condition
To
extend the lives of system components such
as
nozzle orifices and seals, and to reduce the
accumulation
of
mineral deposits on the by-pass valve and other components, high pressure
water must have a low mineral content.
© Copyright April, 2002 NLB Corporation
3-2
To Next Page
Loading...