NLB 1012D - Pre-Operating Procedures

Revision 11
II. Pre-Operating Procedure
WARNING:
READ SECTION 2; SAFETY INSTRUCTIONS BEFORE OPERATING THIS
EQUIPMENT.
OPERATORS SHOULD RECEIVE TRAINING BEFORE USING THE
HIGH PRESSURE WATER JETTING
UNIT. UNTRAINED OPERATORS MAY
CAUSE
EQUIPMENT DAMAGE AND/OR PERSONAL INJURY OR DEATH.
a. Check oil level in diesel engine crankcase (Figure 4-1).
Figure
4-1. Check oil level in engine crankcase.
b. Check coolant level in engine radiator.
c. Check oil level in high pressure pump (Figure 4-2).
Figure
4-2. Check oil level in pump crankcase.
© Copyright June, 2005 NLB Corporation
4-11