Revision
11
d.
Check oil level in plunger lubricator (Figure 4-3).
Figure 4-3. Check oil level in oil plunger lubricator.
e.
Check fuel level in fuel tank (Figure 4-4).
Figure 4-4. Check level in fuel tank.
f.
Undo the water tank latches, open the tank cover and check the water level. Inspect tank
condition.
If
there is any dirt accumulated in the bottom of the tank, drain the water out
and clean the inside
of
the tank. Flush the dirt out and wipe away all dirt with a
lint-free rag. After checking the water level, close the cover and secure the latches.
This prevents any airborne dirt from entering the tank and getting into the pump.
© Copyright June, 2005 NLB Corporation
4-12
To Next Page
Loading...